Satin for depth and a soft sheen, dead flat for a completely shine free surface, coloured satin to transform wood with subtle, even shades. For a completely non reflective finish, apply clear dead flat over coloured satin.
• bookshelves • new wood • furniture • doors • staircases • wood and MDF • fire surrounds • kitchen cabinets
• interior • 1-2 hours drying time • water resistant • heat resistant • abrasion resistant • microporous • water wash up
at a glance product info
available in: 500ml • 1 litre • 4 litre
drying time: 1-2 hours • recoat time: 4 hours • coverage: 15 square metres per litre
application and advice
All surfaces must be clean and free from dust, dirt, oil and contamination.
Ensure the product is well mixed but do not shake. Apply sparingly, brush out well using a good quality brush, following the direction of the grain. Apply the first coat and allow to dry.
clear varnish - apply a second coat.
coloured varnish - for a deeper shade apply a second coat. If the shade required is correct after the first coat, apply a coat of clear.
Always apply to a test area before starting work. Appearance may vary according to the colour and type of wood and the number of coats. Protect the finish from water and steam for five days after application.
Protect from extremes of temperature during storage and application.
health, safety and the environment
Non-hazardous. Ensure good ventilation.
Keep out of reach of children.
Contact with eyes - wash immediately with warm water.
Remove excess from tools and mixing vessels before washing in warm soapy water.
Do not empty into drains or watercourses.