Developed for the marine industry this is the only completely waterproof adhesive that will withstand continual immersion in water.
• structural timber • laminated roof members • timber in constant contact with water • timber in contact with the ground • arches for bridge work • concrete formers • marine craft construction • bonding of preservative treated timber • bonding of difficult timber i.e. teak and iroko
• completely waterproof • withstands extreme weathering • withstands complete water immersion
at a glance product info
D3 water resistance
available in: 670g
drying time: see datasheet • recoat time: N/A • coverage: as required
application and advice
Mixing: By weight - 100 parts of resin to 15 parts of hardener.
Liquid working life: After mixing, the glue mix commences to thicken but will stay usable for between 30 minutes at 30 degrees C and 4½ hours at 10 degrees C. Higher temperatures will shorten the working life, lower temperatures will prolong it.
The mixed glue should be applied to one or both surfaces, which should be brought together while the glue is still wet. Spreading both surfaces permits longer assembly times. The two surfaces must be held under pressure (by clamps, screws, pins etc.) until the glue sets (normally overnight). For best results, the glue should be allowed to set at normal room temperature (15-25 degrees C / 59-77 degrees F). Very low temperatures will slow the setting time of the glue and should be avoided.
Cleaning tools and equipment: When set, there is no known solvent for Polyproof glue. Liquid glue may be removed from tools and containers by washing in warm soapy water.
Protection of the hands - resin glues can cause dermatitis. A wet swab should be used frequently to prevent the glue from setting on the hands.
Store in a cool, dry place with the lids tightly closed.
health, safety and the environment
Contains: Resorcinol and Phenol UN. Number 2810
Harmful in contact with skin and if swallowed • Causes burns • Possible risk of irreversible effects • Do not breath vapour • Use only in well ventilated areas
Keep locked up and out of the reach of children • In case of contact with eyes, rinse immediately with plenty of water and seek medical advice • Wear suitable protective clothing, gloves and eye protection • In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible)
The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. This company shall not be held liable for any damage resulting from handling or from contact with the above product.