shopping basket0 item(s) - £0.00
• hardwood and softwood
• water based • low odour • easy to apply • no overlap marks • seals the surface • fast drying
at a glance product info
water wash up
does not blister or peel
application and advice
All surfaces must be clean and free from dust, dirt, oil and contamination. Remove oils and resins from oily hardwoods and resinous softwoods. Sand to a smooth finish and remove all dust.
Ensure product is well mixed. Do not mix different batch numbers. Pour into a suitable container and mix with other colour if required. Apply generously with a good quality brush, working with the grain and keeping a wet edge. Wipe off any excess quickly to get an even finish.
Different woods and woodgrains will alter the appearance of the wood dye. Apply to a test area prior to application.
Polyvine Wood Dye seals the surface but for added protection apply Polyvine Wood Varnish, Polyvine Heavy Duty Wood Varnish, Polyvine Heavy Duty Floor Varnish, Polyvine Dead Flat Floor Varnish or Polyvine Exterior Varnish.
Protect from extremes of temperature during storage and application.
health, safety and the environment
Non-hazardous. Ensure good ventilation.
Keep out of reach of children.
Contact with eyes - wash immediately with warm water.
Remove excess from tools and mixing vessels before washing in warm soapy water.
Do not empty into drains or watercourses.