SHOP UK
SHOP USA & CANADA
click for a larger image 
how-to video
if you like it share it
An extremely durable, high quality coating with a satin finish that dries to a stain resistant film. Preserves the natural appearance of the wood.
Dramatically reduces yellowing characteristics compared with Polyurethane Varnishes.
For a dead flat finish with high durability and stain resistance, apply one or two coats of satin followed by one or two coats of dead flat.
ideal for
• hardwood and softwood doors • kitchen worktops and cabinets • bar tops • tabletops • counters • bookshelves • wood panelling • protection of oil-based glazing or broken colour work
unique qualities
• extra low yellowing • non reflective • easy to apply • highly heat and water resistant
click for a larger image (Any colours shown are representations and should be used as guidance only. Colours when applied will vary according to the material they are used on.)
dead flat
eggshell
at a glance product info
interior
water resistant
stain resistant
abrasion resistant
heat resistant
application and advice
preparation
All surfaces must be clean and free from dust, dirt, oil and contamination.
application
Ensure the product is well mixed. Apply 2-3 coats of varnish and brush out well. On new wood and porous surfaces dilute the first coat 10% with white spirit. Lightly sand wood in between applications to remove any raising of the grain that may have occurred.
caution
Always apply to a test area before starting work. Appearance may vary according to the colour and type of wood and the number of coats.
Avoid applying in cold or damp conditions as this will delay drying.
storage
Protect from extremes of temperature during storage and application.
health, safety and the environment
Flammable, keep away from sources of ignition - No Smoking. Keep out of reach of children. Use only in well ventilated areas. Ensure maximum ventilation during application and drying. Restrict interior use to large interior spaces or in confined spaces, wear a face mask which is designed to prevent inhalation of solvent vapours. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. After contact with skin, wash immediately with plenty of soap and water or a proprietary skin cleanser - DO NOT USE SOLVENT, THINNERS OR WHITE SPIRIT. Remove excess from tools and mixing vessels before cleaning with white spirits. Toxic to aquatic organisms and may cause long-term adverse effects in the aquatic environment.
Do not empty into drains or watercourses.
Some local authorities have special facilities for disposing of waste coatings. To avoid risk of spilling, always transport and store in a secure upright position.
