Clear Wax Finish Varnish will protect and enhance a wide range of surfaces where a traditional finish is required.
Coloured Wax Finish Varnish transforms wood, producing subtle, even shades, previously only obtainable by a master craftsman.
• wood and MDF • new wood furniture • bookshelves • fire surrounds • kitchen cabinets • staircases • doors
• heat and water resistant • highly durable • silky wax feel • easy to apply in one coat • wash brushes in water
colours and options
Any colours shown are representations and should be used as guidance only.
Colours when applied will vary according to the material they are used on.
All surfaces must be clean and free from dust, dirt, oil and contamination.
On new wood and porous surfaces dilute the first coat 10% with water. Lightly sand wood in between applications to remove any raising of the grain that may have occurred. If a very high level of durability and stain resistance is required, apply one or two coats of clear satin wax finish varnish and one or two coats of clear dead flat wax finish varnish.
Always apply to a test area before starting work.
Too thick a coating, or pooling in crevices, will dry with a white haze.
Appearance may vary according to the colour and type of wood and the number of coats.
Protect the finish from water and steam for five days after application.
storage and safety
Protect from extremes of temperature
during storage and application.
health, safety and the environment
Non-hazardous. Ensure good ventilation.
Keep out of reach of children.
Contact with eyes - wash immediately with warm water.
Remove excess from tools and mixing vessels before washing in warm soapy water.
Do not empty into drains or watercourses.
Download the datasheet here