craquelure system
crack effect varnish
  • craquelure base coat 100ml
  • craquelure base coat 500ml
  • craquelure top coat 100ml
  • craquelure top coat 500ml
  • craquelure top coat 1 litre
  • craquelure base coat 1 litre
  • craquelure highlighter
zoom  click for a larger image

play

how-to video

produces a cracked varnish effect for a traditional aged finish
By using a simple two part (base coat and top coat) clear acrylic system this varnish faithfully reproduces the regular crazed pattern associated with old porcelain glazes.
Please note that you need to buy both the base coat and the top coat to create the effect.
The crackle effect produced by craquelure can be accentuated with a crack highlighter which is available in either white or dark brown for a truly aged finish.

ideal for
• antiquing • decoupage • small objects • picture frames • decorative finishes

unique qualities
• easy to apply • water based • low odour • quick drying • wash brushes and tools in water


find a stockist how-to video

options
zoom click for a larger image (Any colours shown are representations and should be used as guidance only. Colours when applied will vary according to the material they are used on.)
  • craquelure base coatcraquelure base coat
  • craquelure top coatcraquelure top coat

at a glance product info


available in: 3.25oz • 17.6oz • 35.2oz



drying time: 15 minutes to 1 hour depending on temperature • coverage: 80 square feet per quart


application and advice

application
Invert bottle to mix. Apply with a good quality brush. Craquelure performs very well between 16°c (60°f) and 21°c (70°f). Performance outside this range is impaired. Seal porous surfaces with the Top Coat before starting and allow to dry. Apply a liberal coating of Base Coat to the surface, avoiding brush marks and unevenness. Allow to dry – the milky appearance turns clear but the surface remains sticky. Apply a coating of Top Coat avoiding brush marks and unevenness. As the Top Coat dries, fine cracks will appear. If the temperature is too high, play a fan or cold hair dryer over the surface.

Use Polyvine Craquelure highlighter in dark or light to emphasise the craquelure effect - see swatches for effect.

For extra protection apply a coat of Top Coat.

caution
Always try the technique on a test piece before embarking on the project. Walls and vertical surfaces need a lot of practice.

storage
Protect from extremes of temperature during storage and application.

health, safety and the environment
Non-hazardous. Ensure good ventilation.
Keep out of reach of children. Contact with eyes - wash immediately with warm water. Remove excess from tools and mixing vessels before washing in warm soapy water. Do not empty into drains or watercourses.



ask our expert

 

Polyvine on social media

 

facebook instagram twitter pinterest