shopping basket0 item(s) - $0.00
When using dead flat finish, if a very high level of durability and stain resistance is required, apply one or two coats of Heavy Duty Wood Varnish Satin Finish followed by one or two coats of Hard Wearing Wood Varnish Dead Flat Finish.
• hardwood and softwood • doors • kitchen worktops • bar tops • tabletops • counters • bookshelves • kitchen cabinets • wood panelling
• dries fast cures fast • highly heat and water resistant • ultra hard • very clear • good resistance to alcohol, stains and chemicals • sands to a high-grade finish • easy to apply • wash brushes in water
at a glance product info
food and child safe
application and advice
All surfaces must be clean and free from dust, dirt, oil and contamination. Remove oils/resins from oily hardwoods and resinous softwoods. Sand to a smooth finish and remove all dust.
Ensure the product is well mixed. Use a good quality brush and apply evenly using light brush strokes, following the grain of the wood. Keep a wet edge and avoid overlaps.
Apply the first coat and allow to dry.
On new wood dilute the first coat with 10% water. Sand again lightly to obtain the When using dead flat finish, if a very high level of durability and stain resistance is required, apply one or two coats of Heavy Duty Wood Varnish Satin Finish followed by one or two coats of Hard Wearing Wood Varnish Dead Flat Finish.
Always apply to a test area before starting work. Appearance may vary according to the colour and type of wood and the number of coats. Do not apply over uncured oil based paint.
Protect from extremes of temperature during storage and application.
health, safety and the environment
Non-hazardous. Ensure good ventilation.
Keep out of reach of children.
Contact with eyes - wash immediately with warm water.
Remove excess from tools and mixing vessels before washing in warm soapy water.
Do not empty into drains or watercourses.