This coating dries to a crystal clear film with extremely good sanding properties specially formulated to bond to a wide range of surfaces.
• all timber surfaces • galvanised and primed metal • non-ferrous metals • glass • certain plastic • laminate
• hard and durable protection • bonds to a wide range of surfaces • glass clear gloss finish • fast drying • heat and water resistant • water wash up • easy to apply
at a glance product info
food and child safe
application and advice
All surfaces must be clean and free from dust, dirt, oil and contamination.
Timber: Remove oils/resins from oily hardwoods and resinous softwoods. Sand to a smooth finish and remove all dust.
Ensure the product is well mixed. Use a good quality synthetic brush and apply evenly using light brush strokes. Apply the first coat and allow to dry. To prime porous surfaces dilute with 10% water. Apply one or two further coats.
Always apply to a test area before starting work. Do not apply over uncured oil based paint. When applied over emulsion/latex paint, it is possible that the Lacquer can draw certain stains through the paint, which would not otherwise be visible.
Protect from extremes of temperature during storage and application.
health, safety and the environment
Non-hazardous. Ensure good ventilation.
Keep out of reach of children.
Contact with eyes - wash immediately with warm water.
Remove excess from tools and mixing vessels before washing in warm soapy water.
Do not empty into drains or watercourses.