stone and brick protector
dead flat
  • stone and brick protector 1 litre
  • stone and brick protector 4 litre
zoom  click for a larger image


how-to video

absorbed into the substrate, this high performance coating protects interior and exterior stone and brick for a completely natural finish
A high performance water-based masonry protector and water repellent. Dries to a dead flat finish, which retains the natural look of the substrate. Protection of the surface begins immediately after application and is complete in approximately 24 hours.

ideal for
• stone • plaster • brick • slate • flagstones • fireplaces • exposed stone walls • brick walls • stone window ledges

unique qualities
• waterproofs brick and stone • suppresses formation of salts on natural masonry surfaces •  improves weatherability • a moisture barrier - seals off the surface • resists penetration of grease, oil, acids, alkaline, salts • easily cleaned with mild soap and water

find a stockist how-to video

zoom click for a larger image (Any colours shown are representations and should be used as guidance only. Colours when applied will vary according to the material they are used on.)
  • dead flatdead flat

at a glance product info

available in: 35.2oz • 1 gallon

drying time: 15 minutes to 1 hour depending on temperature • coverage: 150-200 square feet per quart, depending on the porosity of the material

application and advice

Do not use in temperatures below 5°c/40°f or in very high humidity. Stone and brick protector should be used as supplied, without dilution, by brush, spray or roller.

Mix well before use.
For general applications on masonry, brickwork and stone, a single application will be sufficient.

Always test on a trial area before application. Apply evenly and do not allow to pool in crevices. Test for clarity over dark colours.
NOTE: A chemical reaction could take place on some substrates such as glass, glazed surfaces, lead or aluminium. Mask these materials before application. In case of contact, rinse thoroughly with water immediately.

Store in unopened containers in a cool dry place away from direct sunlight. Protect from extremes of temperature during storage and application.

health, safety and the environment
Non-hazardous. Ensure good ventilation.
Keep out of reach of children.
Contact with eyes - wash immediately with warm water.
Remove excess from tools and mixing vessels before washing in warm soapy water.
Do not empty into drains or watercourses.

ask our expert

find the right product for the job - adhesives heavy duty floor varnish decorators varnish crystal clear lacquer extra pale varnish heavy duty extreme varnish heavy duty wood varnish wood dye stone and brick protector wax finish varnish heavy duty extreme varnish stone and brick protector wood dye heavy duty wood varnish decorators varnish extra pale varnish crystal clear lacquer wax finish varnish heavy duty floor varnish


Polyvine on social media


facebook instagram twitter pinterest