shopping basket0 item(s) - $0.00
• vintage look • upcycling furniture • distressing • shabby chic • wood • stone • ceramic • primed metal • primed matt plastic
• velvet smooth • dead flat finish • rarely requires any surface preparation • works over old painted or varnished surfaces • covers in one coat • low odour • brushes and tools wash in water
at a glance product info
application and advice
Using one part Chalk Paint Maker to two parts flat latex paint, thoroughly mix together. All surfaces must be clean and free from dust, dirt or contaminants. Clean off any wax with white spirit. Prime bare metal and plastic.
Work in exactly the same way as the instructions on your flat latex paint can. Lightly rub down between coats.
For a distressed look, apply two coats of contrasting colours - when dry sand through top coat to reveal patches of base coat colour. Protect with Polyvine Wax Finish Varnish.
Always try a test area before starting.
Protect from extremes of temperature during storage and application.
health, safety and the environment
Non-hazardous. Ensure good ventilation.
Keep out of reach of children. Contact with eyes - wash immediately with warm water. Remove excess from tools and mixing vessels before washing in warm soapy water. Do not empty into drains or watercourses.