Currency
£ $

shopping basket

0 item(s) - $0.00
Your shopping basket is empty!
Welcome visitor you can login or create an account.
Home Wish List (0) My Account shopping basket Checkout

options


* size:
1 gallon ($111.77)
3.52oz ($6.36)
17.6oz (approx. 1 pint) ($19.80)
35.2oz (approx. 1 quart) ($33.04)

* finish:
zoom click for a larger image (Any colours shown are representations and should be used as guidance only. Colours when applied will vary according to the material they are used on.)

  QUANTITY   

go to checkout

carry on shopping
heavy duty wood varnish
satin and dead flat finishes
  • heavy duty wood varnish satin 1 litre
  • heavy duty wood varnish satin 4 litre
  • heavy duty wood varnish dead flat 500ml
  • heavy duty wood varnish dead flat 4 litre
  • heavy duty wood varnish satin 500ml
  • heavy duty wood varnish 100ml
  • heavy duty wood varnish dead flat 1 litre
zoom  click for a larger image

ultra tough, crystal clear protection for interior surfaces that dries fast and cures fast
An ultra hard, high quality coating with a satin finish that dries to a crystal clear film with extremely good sanding properties allowing a very high quality of finish to be obtained. Formulated for working surfaces and areas of high wear.
When using dead flat finish, if a very high level of durability and stain resistance is required, apply one or two coats of Heavy Duty Wood Varnish Satin Finish followed by one or two coats of Hard Wearing Wood Varnish Dead Flat Finish.

ideal for
• hardwood and softwood • doors • kitchen worktops • bar tops • tabletops • counters • bookshelves • kitchen cabinets • wood panelling

unique qualities
• dries fast cures fast • highly heat and water resistant • ultra hard • very clear • good resistance to alcohol, stains and chemicals • sands to a high-grade finish • easy to apply • wash brushes in water


find a stockist

options
zoom click for a larger image (Any colours shown are representations and should be used as guidance only. Colours when applied will vary according to the material they are used on.)
  • dead flatdead flat
  • satinsatin

cures in 16 hours

at a glance product info

  • food and child safe
    food and child safe

available in: 3.25oz • 17.6oz • 35.2oz • 1 gallon



drying time: 30-60 minutes • recoat time: 1-2 hours • curing time: 16 hours • coverage: 100-200 square feet per quart


application and advice

preparation
All surfaces must be clean and free from dust, dirt, oil and contamination. Remove oils/resins from oily hardwoods and resinous softwoods. Sand to a smooth finish and remove all dust.

application
Ensure the product is well mixed. Use a good quality brush and apply evenly using light brush strokes, following the grain of the wood. Keep a wet edge and avoid overlaps.
Apply the first coat and allow to dry.
On new wood dilute the first coat with 10% water. Sand again lightly to obtain the When using dead flat finish, if a very high level of durability and stain resistance is required, apply one or two coats of Heavy Duty Wood Varnish Satin Finish followed by one or two coats of Hard Wearing Wood Varnish Dead Flat Finish.

caution
Always apply to a test area before starting work. Appearance may vary according to the colour and type of wood and the number of coats. Do not apply over uncured oil based paint.

storage
Protect from extremes of temperature during storage and application.

health, safety and the environment
Non-hazardous. Ensure good ventilation.
Keep out of reach of children.
Contact with eyes - wash immediately with warm water.
Remove excess from tools and mixing vessels before washing in warm soapy water.
Do not empty into drains or watercourses.



ask our expert