Currency
£ $

shopping basket

0 item(s) - $0.00
Your shopping basket is empty!
Welcome visitor you can login or create an account.

options


* size:
1 gallon ($100.78)
35.2oz (approx. 1 quart) ($28.07)

  QUANTITY   

go to checkout

carry on shopping
stone and brick protector
dead flat
  • stone and brick protector 1 litre
  • stone and brick protector 4 litre
zoom  click for a larger image

play

how-to video

absorbed into the substrate, this high performance coating protects interior and exterior stone and brick for a completely natural finish
A high performance water-based masonry protector and water repellent. Dries to a dead flat finish, which retains the natural look of the substrate. Protection of the surface begins immediately after application and is complete in approximately 24 hours.

ideal for
• stone • plaster • brick • slate • flagstones • fireplaces • exposed stone walls • brick walls • stone window ledges

unique qualities
• waterproofs brick and stone • suppresses formation of salts on natural masonry surfaces • improves weatherability • a moisture barrier - seals off the surface • resists penetration of grease, oil, acids, alkaline, salts • easily cleaned with mild soap and water



find a stockist how-to video

options
zoom click for a larger image (Any colours shown are representations and should be used as guidance only. Colours when applied will vary according to the material they are used on.)
  • dead flatdead flat

at a glance product info


    available in: 35.2oz • 1 gallon



    drying time: 15 minutes to 1 hour depending on temperature • coverage: 150-200 square feet per quart, depending on the porosity of the material


    application and advice

    preparation
    Do not use in temperatures below 5°c/40°f or in very high humidity. Stone and brick protector should be used as supplied, without dilution, by brush, spray or roller.

    application
    Mix well before use.
    For general applications on masonry, brickwork and stone, a single application will be sufficient.

    caution
    Always test on a trial area before application. Apply evenly and do not allow to pool in crevices. Test for clarity over dark colours.
    NOTE: A chemical reaction could take place on some substrates such as glass, glazed surfaces, lead or aluminium. Mask these materials before application. In case of contact, rinse thoroughly with water immediately.

    storage
    Store in unopened containers in a cool dry place away from direct sunlight. Protect from extremes of temperature during storage and application.

    health, safety and the environment
    Non-hazardous. Ensure good ventilation.
    Keep out of reach of children.
    Contact with eyes - wash immediately with warm water.
    Remove excess from tools and mixing vessels before washing in warm soapy water.
    Do not empty into drains or watercourses.



    ask our expert